PL-227hp Specifications
|
PL-227hp Specifications |
| Laminating Width | 6"-27" |
| Speed | Max Mechanical Speed: 16 fpm Maximum Sustained Lamination Speed: 1.2 Mil @ 230 degrees 16fpm 3 Mil @250 Degrees 7 fpm |
| Laminate | Polyester, Polypropylene, Nylon, vinyl, and other plastics - Thermal or Cold |
| Max Film Thickness | 10.0 Mil |
| Max Substrate Thickness | .250 |
| Cooling Fans | 4 @ 110 CFM ea. = 440 cubic feet per minute |
| Warm Up Time | Less Than. 5 min. |
| Max Film Roll Dia. 1.5 mil | w/o stand 6", with stand 11" |
| Stand | Standard, 3" Mandrels Included |
| Gapable rolls | Yes-Front Heat and Rear Pull Rollers |
| Temp Cont. | Solid State - Digital Readout 2 degree hysteresis |
| Motor / Speed Control | DC High Torque Gear Motor / Solid State Variable, Both Air Cooled |
| Slitters | 2 Micro-Adjustable Included |
| Heated Roll Watts | 1350 ea 2700 combined, 9215 BTU's |
| Electrical Requirements | 240 Volt 60 Hz 13 Amps/2,800 Watts / Dedicated 20 Amp Circuit |
| Dimensions | 38"W x 20"D 16"H -w/o stand 40"H-w/ stand |
| Shipping Dimensions 2 Packages | Laminator 18" x 43" x 20" / Stand 23" x 33" x 8" |
| Weight | Laminator and Stand 154 lbs |
| Shipping Weight | Laminator 92# Stand 62# |
