PL1200hp Specifications
|
PL1200hp Specifications |
| Laminating Width | 4" - 12" |
| Speed | Max Mechanical Speed: 18 fpm Maximum Sustained Lamination Speed: 1.5 Mil @ 275 degrees 15-18 fpm 3 Mil @250 Degrees 8 fpm |
| Laminate | Polyester, Polypropylene, Nylon, vinyl, and other plastics - Thermal or Cold |
| Max Film Thickness | 10.0 Mil + |
| Max Substrate Thickness | .250 |
| Cooling Fans | 2 @ 110 CFM ea. |
| Warm Up Time | Less Than. 5 min. |
| Max Film Roll Dia. 1.5 mil | w/o stand 6", with stand 11" |
| Stand | Standard, 3" Mandrels Included |
| Gapable rolls | Yes-Front Heat and Rear Pull Rollers |
| Temp Cont. | Solid State - Digital Readout 2 degree hysteresis |
| Motor / Speed Control | DC High Torque Gear Motor / Solid State Variable, Both Air Cooled |
| Slitters | 2 Micro-Adjustable Included |
| Heated Roll Watts | 850 ea 1,700 combined, 5803 BTU's |
| Electrical Requirements | 120 Volt 60 Hz 16 Amps/1,900 Watts / Dedicated 20 Amp Circuit |
| Dimensions | 23"W x 20"D 16"H -w/o stand 40"H-w/ stand |
| Shipping Dimensions 2 Packages | Laminator 18" x 28" x 20" / Stand 23" x 33" x 8" |
| Weight | Laminator and Stand 115 lbs |
| Shipping Weight | Laminator 67# Stand 62# |
