The film roll capacity on the PLS laminators is often described as "huge".

The standard roll diameter is about 11" on a laminator with slitters and stand.

Without slitters the capacity is approximately 12".

Lower mandrel capacity is 12" when used with a stand

When a laminator is sold as a table top model (without stand) its film capacity is about 6", due to the placement of the lower film roll under the feed table. If only one sided lamination is desired the upper position of a table top model is 11" dia. roll of film .

Keep in mind when ordering film that a large film roll may weigh a considerable amount.

See

Approximate film roll diameter vs. length

Thickness	6"dia, 3" core	11" dia, 3" core	6" dia, 1" core
1.2 mil	1,200'	5,800' ( over a mile!!)	1,800
1.7 mil	850'	4,000'	1,300
3.0 mil	500'	2,300'	757'
5.0 mil	300'	1,400'	450
10.0mil	150'	700'	200'

1 mil = .001 inch / / dia = diameter
For a handy roll calculator, visit Protect-all